当前位置:网站首页>How to restore the factory settings of fluke dsx2-5000 and 8000 Ch

How to restore the factory settings of fluke dsx2-5000 and 8000 Ch

2021-02-23 17:56:11 Lianxuda

How to restore fluke dsx2-5000 and dsx2-8000 ch Network Tester Factory settings for ?Versiv use fluke dsx2-5000 and dsx2-8000 Ch 2 platform , Through the optional optical test module , It can be a copper and fiber integrated certification tester , Can store up to 12000 Copper cable test report . If daily cleaning is not frequent , You will find that there are too many data cleaning in the past, one-time cleaning , It takes too much time to delete one by one , Or the system is abnormal when the device is in use , It can restore the factory settings, restore the system .
 
First, turn on the machine , Enter the main interface , Click on “ Tools ”, Slide down to find “ Memory status ”, Click on “ Get into ”, Then click on the four corners of the screen in turn , As shown in the figure below


here , The system will pop up whether to restore prompt . If you choose “ yes ”, The system will automatically restore the factory settings . Please save the data to be backed up before recovery , Otherwise, the data will be cleared .

版权声明
本文为[Lianxuda]所创,转载请带上原文链接,感谢
https://chowdera.com/2021/02/20210223175434266V.html

随机推荐