当前位置:网站首页>DPD bar code applied in barcode printing software

DPD bar code applied in barcode printing software

2020-11-10 16:03:03 Yu Xiaotao

DPD Bar code by DPD(Deutscher Paket Dienst) Use ,DPD Bar codes are based on Code128 Code coded , The encoding length is limited to 28 position ,DPD Bar code is different from ordinary bar code , Its encoded data ( Bar code itself data ) And human readable data ( The data displayed below the bar code ) It's a little different .

DPD The bar code data and human readable data are compared as follows :

Encoding data :IPPPPPPPTTTTTTTTTTTTTTSSSCCC

Readable data :PPPPPPPTTTTTTTTTTTTTTSSSCCCD

By comparing the above coded data with human readable text, we can see that , Human readable data has no previous data , But a check code is added to the back , The check algorithm is : modulus 103(eCDCode128).

DPD bar code 1.png 

Let's take a look DPD How to make bar code :

Open Zhonglang barcode printing software , Create a new blank label , Then use the tool bar on the left side of the software “ Draw one-dimensional code ” The tool adds a barcode to the white canvas ( The default type of barcode is Code128), Double click the bar code to open “ Graphic properties - bar code ” One column , Change the barcode type to “DPD”.

DPD bar code 2.png 

Then click on it “ data source ” One column , Click under the data object “ modify ” Button , eject “ Data object management ” window , Delete default data 123456, Then input 28 position DPD Bar code data , And save the changes to see DPD Bar code effect , The previous data cannot be seen , A check bit is added after it .

DPD bar code 3.png 

To sum up, it is about Zhonglang barcode printing software DPD Bar code details and how to make , Zhonglang software supports a variety of bar codes , If you need it, you can download it !

版权声明
本文为[Yu Xiaotao]所创,转载请带上原文链接,感谢