当前位置：网站首页>RFID fixed assets management system for fire equipment

RFID fixed assets management system for fire equipment

2020-11-06 22:06:16 【RFID serial macro】

5 Line code , Can let wechat small program on the shelf to their own APP in | Register and send it to Dajiang 、 Huawei 、 Cherry keyboard ！>>>

1. Application background

There are countless fire accidents around the world every year , Causing many casualties and property damage . After China's reform and opening up , The Fire Department of public security also refers to the following . Into the National Fire Code , The fire protection design in line with China's national conditions has been formulated comprehensively , Installation and acceptance specification . However , With strict fire protection regulations , Fires that cause casualties and property damage still occur from time to time . The adjustment results show that , Some are caused by the fire , Because the fire-fighting facilities are not well managed and properly maintained , As a result, it is not able to timely alarm or start fire fighting , To keep the fire spreading . therefore , For buildings , No matter how its fire protection design meets the standard requirements , How complete is its fire fighting facilities , But it lacks perfect management and regular or regular maintenance , When there is a fire , Failure may occur and it will not be able to extinguish the fire . thus it can be seen , The daily management and maintenance of fire facilities is of great significance .

 

Fire Equipment RFID Fixed assets management system ,RFID Asset management ,RFID

 

Businesses and units are aware of this problem , Buy fire fighting equipment , Register fire fighting equipment , Establish personnel inspection and scrap replacement system , To a certain extent, it ensures the usability of fire fighting equipment , But there's no denying it , Because of the lack of effective information management and regulatory means , In fact, there are many loopholes in the daily inspection management , There are a lot of imperfect management , Tool inventory work is heavy , The inspection was not in place , Equipment loss, etc , It's a big security risk .
 
2. System introduction
 
Using advanced information technology , Strengthen the ability of information management , Strengthen the supervision of inspection process , Improve the management level of the whole fire fighting equipment , It is urgent to eliminate the hidden danger of safety .
 
Management of fire fighting equipment , The core lies in the establishment of basic data , And in each key node to collect and obtain data information .RFID RFID technology , Since it was applied during World War II , More and more attention has been paid to it , More and more industries are paying attention to RFID The function and practicability of , The R & D personnel have successively developed generation after generation of information acquisition equipment and information storage equipment with stable performance, which can meet a variety of needs , This makes RFID The application of this technology has rapidly expanded to various fields , Based on fire fighting equipment RFID Fixed assets management application ,RFID Played a very important role .
 
RFID Technology uses wireless electromagnetic wave to realize data transmission and interaction , It is a non-contact automatic recognition technology , There is no need for human intervention in the identification process , Can work with a variety of harsh environments .RFID Have only . One sex , It can recognize high-speed moving objects and identify multiple tags at the same time . therefore , take RFID Technology used in the fixed assets management of fire equipment , It can make the management of equipment easy and simple , Avoid data errors and time consumption caused by manual operation and recording , Solve the problems in the existing management model , To ensure the safe use of fire fighting equipment .
 
3. The system design
 
Fire Equipment RFID Fixed assets management is achieved through the installation of fire equipment RFID Electronic label , Bind the corresponding asset information in the background , At key nodes and processes , Through to RFID Electronic tag information collection , To get the exact details of the asset .
 
3.1 System hardware framework

 

RFID The basic framework of asset management system hardware is as follows :

 

RFID Fire equipment management system

 

RFID Tag Association binding each fire fighting equipment , Establish the electronic identity of fire equipment .RFID Mobile data acquisition terminal is the collection of information 、 Business processing 、 Intelligent hardware for data upload .
 
3.2 System platform design

 

Fire Equipment RFID The construction of fixed assets management system platform , Will be based on RFID Under the framework of technology construction , It is the main responsible unit of fire fighting 、 Fire management department 、 Government decision-making departments provide unimpeded communication channels .

 

Fire Equipment RFID Fixed assets management system ,RFID Fixed assets ,RFID Asset management system

 

3.3 System flow

 

In the jurisdiction of all fire equipment pasted passive rfid label , There's memory on the tag , The purchase time of the fire fighting equipment can be recorded , Due time , Installation time , person in charge , Inspection times and other information .
 
RFID Fixed assets management system to establish electronic files of fire equipment , Unified storage in the central server of the management department , And provide expiration alarm function . The system will display the alarm prompt on the management page of the unit , At the same time, it will also send SMS to the mobile phone of the relevant personnel or person in charge of the unit , Remind them to replace .
 
Fire management department arranges inspection plan for each unit 、 Management's sampling plan , These can be annual plans , Monthly plan , Weekly plan , Temporary plans, etc , The system will automatically generate SMS content according to the plan , And send it to the mobile phone of relevant executors of each unit in time , Remind the person （ Company ） Carry out inspection of fire fighting equipment , At the same time, the plan can also be downloaded to the specific executor's mobile data acquisition terminal .
 
Inspection personnel of each unit , The management unit is equipped with a sampling inspection personnel RFID Mobile data acquisition terminal , The RFID The handheld terminal can be connected with the rfid Tags communicate , Can also work with station machine （ Managing computers ） Communications . Each inspector receives the inspection plan from the management department , Scan the fire equipment in turn （ Read ）, It will be in RFID Inspection records are formed in the handset , If the equipment is found to be damaged , Or not functioning properly , The inspector will be in RFID Make a choice on the handset , And keep it in the inspection record .
 
Each sampling personnel receives the sampling plan from the management department , And then get to the designated unit , Read the fire equipment of the unit in turn , At this time, a patrol record will be formed in the handset , If the equipment is found to be damaged , Or not functioning properly , The sampling personnel will make the corresponding selection on the handset , And keep it in the spot check record .
 
The management department obtains the relevant record data of each unit , Make statistics , analysis , Form various reports , According to different inspection records , Supervise the responsible unit to carry out relevant maintenance or replacement work , Complete the supervision of fire equipment in each area .

 

Fire Equipment RFID Fixed assets management system ,RFID Fixed assets ,RFID Asset management system


3.4 System characteristics  

 

√ Dynamic display of the status of each fire fighting equipment , Know the status quo of fire fighting equipment anytime and anywhere .


When the master data is set , Locate the fire fighting equipment （ coordinate ）, then RFID Asset management System According to the real-time inspection records , Show the location and status of the device , It's in good condition or out of order or due , The system will be marked in different colors , Let the manager know at a glance .

√ Real time analysis of operation information of inspection personnel , Effectively supervise the inspectors .


The system has multiple plans , Such as inspection and counting , Sampling plan , And then according to the inspection records , Sampling inspection records are used to feed back each patrol inspection （ Spot check ） The implementation of the staff , So as to effectively supervise the inspectors , Prevent laziness , Cheating happens , It can also ensure that the inspection is in place , Ensure the safe use of fire fighting equipment .

√ Can solve the problem in time , And promote the completion of the business .


When the inspector sends the fault information back to the central server , The upper computer management system will capture it immediately , And inform relevant personnel to deal with it immediately or as planned , And then real-time monitoring of fault handling feedback information , Until you get feedback , The business is terminated .

√ Get a lot of valuable reports


be based on Fire Equipment RFID The fixed assets management system will, on request , Comprehensive analysis of various records in the system , Provide a lot of reports , To facilitate scientific decision-making by management .

4. Hardware selection

4.1 RFID Mobile data acquisition terminal

 

be based on Fire Equipment RFID Fixed assets management system has a long-distance rapid identification 、 high reliability 、 High security 、 Easy to operate 、 Easy to expand and other advantages , Asset identification system can run independently , Independent of other systems .
 
In this application , Mobile data acquisition terminal is the source of basic information , therefore , Mobile data acquisition terminal RFID Performance matters , It is the core to ensure the normal operation of the whole system .
 
Quan Shunhong W6100 RFID Mobile data collector It's an Android based system development , Set 1D or 2D Bar code scanning 、4G a phone fit all kinds of networks 、GPRS 、WIFI、BLUETOOTH 、RFID A portable industrial intelligent data acquisition device with integrated functions , Friendly interface , Easy to operate , It can help the staff to complete the daily work of fire equipment management quickly and flexibly .

 

RFID Mobile data acquisition device , UHF rfid Handheld machine ,RFID Handheld terminal

 

Product features

 

1） use 5.5 " IPS screen , The resolution of the 720*1440, HD full view , You can see it in the sun , And with high-performance gorilla three generations of secondary strengthening glass , Support multi point capacitive touch screen ;

 

2） Users can choose different functional modules according to their actual needs , Implementation of one-dimensional code 、 QR code 、RFID Data collection , And pass USB、GPRS、4G、WIFI（IEEE802.11b/g/n/ac）、 Bluetooth and other wired wireless communication methods , Realize the fast and effective transmission of collected data ;

 

3） use ANDROID 9.0 Embedded operating system , Friendly interface , It's easy to operate , Easy to use , scanning 、 The recognition result is intuitive ;
 

4） The equipment is light , Suitable for one handed work , It can be flexibly applied to any environment , Simplify business processes , Improve work efficiency .

4.2 RFID Electronic label


Quan Shunhong  RFID Electronic tags are used for It is an important data carrier in the process of fire asset management , Play a logo recognition 、 Fire asset tracking 、 The role of information gathering . meanwhile , Because in the whole process of fire assets tracking management , Materials for the assets that need to be identified 、 species 、 The effect is different , therefore ,RFID The selection of labels is not the same , The specific term , According to the type of items to be marked , It can be divided into the following ：

 

Fire Equipment RFID Electronic label ,RFID Fixed assets tag ,RFID Asset management system tags

 

About Quan Shunhong

 

shenzhen Quanshunhong Technology As a professional . Industry RFID Internet of things equipment and technical services to provide merchant , To the operators 、 Integrators provide ThingMagic At the same time , The company has also been a professional technical team , Quality service , Preferential price , Provide the world for our customers — The flow of RFID Equipment solutions and high quality after-sales service . The company cooperates with the major operators 、 Integrators have succeeded in bringing ThingMagic RFID equipment , Application stay   Warehousing logistics 、 Archives informatization 、 Air shipping 、 clothing retail 、 automobile manufacture 、 Smart medicine . Therapy 、 Asset management 、 Anti counterfeiting tracing   In various applications in many fields . From product selection , To project design and system platform support , To provide users with easy operation and high stability , It's different 、 Innovative comprehensive technical services . 

版权声明
本文为[RFID serial macro]所创，转载请带上原文链接，感谢

边栏推荐

猜你喜欢

随机推荐